Advantech POC-821 handleiding
Handleiding
Je bekijkt pagina 4 van 46
POC-821 Series User Manual iv
9. Improper installation of a VESA mount can result in serious personal injury!
VESA mount installation should be performed by a professional technician.
Please contact a service technician or your retail outlet if you need this service.
The operating procedure is detailed in Appendix A.
10. CLASSIFICATION:
1). Class I externally powered
2). No applied parts
3). Continuous operation
4). Not an AP or APG category device
11. Environmental protection: follow local requirements for electronics disposal.
12. Maintenance: to properly maintain and clean the surfaces, use only the
approved products or clean with a dry applicator.
13. Make sure the user does not come in contact with SIP/SOPs and the patient at
the same time.
14. When networking with electrical devices, the operator is responsible for ensur-
ing that the resulting system meets the requirements set forth by the following
standards:
– EN 60601-1 (IEC 60601-1)
Medical electrical equipment
Part 1: General requirements for safety
– EN 60601-1-2 (IEC 60601-1-2)
Medical electrical equipment
Part 1-2: General requirements for safety
Collateral standard: Electromagnetic compatibility; Requirements and tests
15. Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore, all configurations shall comply with the system standard IEC
60601-1. Every person who connects additional equipment to the signal input
component or signal output component in a medical system is responsible to
ensure that the system complies with the requirements of the system standard
IEC 60601-1. The unit is for the exclusive interconnection with IEC 60601-1 cer-
tified equipment in the patient environment and IEC 60XXX certified equipment
Caution! The battery charging indicator is not included with this device. It should
be added to the system assembly and be easily readable.
Warning! This device is not suitable for use in the presence of a flammable anes-
thetic mixture with air, oxygen, nitrous oxide, or as part of a life support
system.
Caution! When servicing the device, always use replacement parts that meet
Advantech standards. Advantech Medical cannot warrant or endorse
the safe performance of third-party replacement parts for use with our
medical devices.
Bekijk gratis de handleiding van Advantech POC-821, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | POC-821 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3768 MB |
