Advantech PCM-9366N-S2A2 handleiding
Handleiding
Je bekijkt pagina 35 van 79
27
PCM-9366 User Manual
3.1.2.10 USB Configuration
◼
Legacy USB Support
Enables Legacy USB support. AUTO option disables legacy support if no USB
devices are connected. DISABLE option will keep USB devices available only
for EFI applications.
◼
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI owner
ship change should be claimed by XHCI driver.
◼
USB Mass Storage Driver Support
Enable/Disable USB Mass Storage Driver Support.
◼
USB transfer time-out
Time-out value for control, Bulk, and interrupt transfers.
◼
Device reset time-out
USB mass storage device start unit command time-out.
◼
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from Hub descriptor.
Chapter 3
AMI BIOS Setup
Bekijk gratis de handleiding van Advantech PCM-9366N-S2A2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCM-9366N-S2A2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7617 MB |
