Advantech PCM-3718H handleiding
Handleiding
Je bekijkt pagina 20 van 80
PCM-3718 Series User Manual 12
Chapter 2 Installation
2.1 Initial Inspection
All cards in the PCM-3718 Series are carefully inspected mechanically
and electrically before shipment. It should be free of marks and scratches
and in perfect order when received.
As you unpack the PCM-3718 card, check for signs of shipping damages
(damaged box, scratches, dents, etc.). If it is damaged or fails to meet
specifications, notify our service department or your local sales
representative immediately. We will then make arrangement to repair or
replace the unit for you.
Discharge any static electricity on your body before touching the board
by touching the back of the system unit (grounded metal).
Also keep from materials of static electricity such as plastic, vinyl and
styrofoam.
Remove the PCM-3718 card from its protective packaging by grasping
the rear metal panel. Handle the module only by its edges to avoid static
electricity which could damage its integrated circuits. Keep the anti-
static packaging material for storage and protection when you have to
remove the module from its connector.
Bekijk gratis de handleiding van Advantech PCM-3718H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCM-3718H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5483 MB |
