Advantech PCIE-1812 handleiding
Handleiding
Je bekijkt pagina 10 van 78
PCIE-1812 User Manual 2
1.1 Product Overview
Figure 1.1 Card Layout
1.2 Products Features
1.2.1 Board ID
A board ID can be assigned through the onboard slide switch for the device. The
board ID value in the device description of the software is used to map the device in
the software to the actual hardware device. Board ID is useful when there are multi-
ple hardware devices with the same model name in the system. Without the board
ID, users cannot recognize which device in the software that the hardware device is
related to.
When configured as 0, the board ID is automatically assigned by the device driver
software. When configured as value other than 0, the configured value is used. Do
not configure the same value (except for 0) for hardware devices with the same
model name. Refer to the device specifications for the configuration of the board ID.
If changed, the new board ID value takes effect only after a cold reset of the device.
Table 1.1: List of connectors and switches
Component Function
SW1 Board ID
CN2 MDSI IN
CN3 MDSI OUT
CN4 100-pin SCSI Connector
JP1 Power-on Configuration.
JP2 ~ JP9 DI/O Control Selection
TP5 Positive terminal for voltage reference calibration.
TP6 Negative terminal for voltage reference calibration.
Bekijk gratis de handleiding van Advantech PCIE-1812, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1812 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8115 MB |
