Advantech PCIE-1805 handleiding
Handleiding
Je bekijkt pagina 21 van 42
15 PCIE-1805 User Manual
Chapter 3 Signal Connections
3.2.1 Board ID (SW1)
The PCIE-1805 has a built-in DIP switch (SW1), which is used to define each card’s
board ID. When there are multiple cards on the same chassis, this board ID switch is
used to set each card’s device number.
After setting each PCIE-1805, you can identify each card in system with different
device numbers. The default value of board ID is 0 and if you need to adjust it to
other value, please set the SW1 by referring to Table 3.1.
Default Setting is 0
Table 3.1: Board ID Setting (SW1)
SW1 Position 1 Position 2 Position 3 Position 4
BoardID Bit0 Bit1 Bit2 Bit3
0ONONONON
1ONONONOFF
2 ON ON OFF ON
3 ON ON OFF OFF
4 ON OFF ON OFF
5 ON OFF ON OFF
6 ON OFF OFF ON
7 ON OFF OFF OFF
8OFF ONONON
9OFF ONONOFF
10 OFF ON OFF ON
11 OFF ON OFF OFF
12 OFF OFF ON ON
13 OFF OFF ON OFF
14 OFF OFF OFF ON
15 OFF OFF OFF OFF
Bekijk gratis de handleiding van Advantech PCIE-1805, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1805 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3945 MB |
