Advantech PCIE-1761H handleiding
Handleiding
Je bekijkt pagina 13 van 28
7 PCIE-1761H User Manual
Chapter 2 Installation
Board ID (SW1)
The PCIE-1761H card features a built-in DIP switch (SW1) that is used to define the
Board ID for each card. When multiple cards are installed on the same chassis, the
Board ID switch is useful for identifying each card’s device number. After installing
PCIE-1761H cards, users can identify each card using their different device num-
bers. The default Board ID value is 0. When adjusting the Board ID value, refer to
Table 2.2 to configure SW1.
Note: On: 0, Off: 1
Table 2.2: Board ID Settings (SW1)
Board ID (dec) Switch Position
* = default 1 (ID3) 2 (ID2) 3 (ID1) 4 (ID0)
0ONONONON
1ONONONOFF
2ONONOFFON
3ONONOFFOFF
4ONOFFONON
5ONOFFONOFF
6ONOFFOFFON
7ONOFFOFFOFF
8 OFF ON ON ON
9 OFF ON ON OFF
10 OFF ON OFF ON
11 OFF ON OFF OFF
12 OFF OFF ON ON
13 OFF OFF ON OFF
14 OFF OFF OFF ON
15 OFF OFF OFF OFF
Bekijk gratis de handleiding van Advantech PCIE-1761H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1761H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1769 MB |
