Advantech PCIE-1753 handleiding
Handleiding
Je bekijkt pagina 18 van 36
PCIE-1753 User Manual 10
After the PCIE-1753 card is installed, you can verify whether it is properly installed on
your system through the Device Manager:
1. Access the Device Manager through Control Panel/System/Device Manager.
2. The device name of the PCIE-1753 should be listed on the Device Manager tab
as follows.
Figure 2.1 Device Manager
After your card is properly installed on your system, you can then configure your
device using the Advantech Navigator after you install XNavi on your computer.
Note! If your card is properly installed, you should see the device name of your
card listed on the Device Manager tab. If you do see your device name
listed on it but marked with an exclamation mark “!”, it means your card
has not been correctly installed. In this case, remove the card device
from the Device Manager by selecting its device name and press the
Remove button. Then go through the driver installation process again.
Bekijk gratis de handleiding van Advantech PCIE-1753, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1753 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3974 MB |
