Advantech PCIE-1672E-BE handleiding
Handleiding
Je bekijkt pagina 14 van 22
PCIe-GbE_PoE User Manual 8
2.3 Card Installation
1. Turn off the computer and all peripheral devices (such as printers and monitors).
2. Disconnect the power cord and any other cables from the back of the computer.
3. Remove the PC’s cover (refer to your user’s guide if necessary).
4. Install and plug the PCI Express GbE PoE card on your PCI Express BUS.
5. Replace the PC’s cover. Connect the cables you removed in step 3 and connect
the power connector and power supply with the power cable in the package.
6. Turn the computer power on.
7. Install the driver in PCI Express GbE PoE CD-ROM, see chapter 3.1, 3.2 and
3.3.
8. Test your Ethernet port and verify if Ethernet port could work normally, see
chapter 4.
Note! We strongly recommend that you install the software driver before you
install the hardware into your system, since this will guarantee a smooth
and trouble-free installation process.
Turn off your PC's power supply whenever you install or remove the PCI
Express GbE PoE card or its cables. Static electricity can easily damage
computer equipment. Ground yourself by touching the chassis of the
computer (metal) before you touch any boards. See the static warning
on Ch.2
Bekijk gratis de handleiding van Advantech PCIE-1672E-BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1672E-BE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3071 MB |
