Advantech PCIE-1245E handleiding
Handleiding
Je bekijkt pagina 18 van 26
PCIE-1245/1245E User Manual 12
3.1 Overview
Maintaining signal connections is one of the most important factors in ensuring that
your application system is sending and receiving data correctly. A good signal con-
nection can avoid unnecessary and costly damage to your PC and other hardware
devices.
This chapter provides useful information about how to connect control and I/O signals
to the PCI Express cards via the terminal board.
3.2 PCIE-1245 Switch and Jumper Settings
Please refer to Table 3.1 for jumper and switch locations on PCIE-1245/1245E.
3.2.1 Board ID (SW1)
PCIE-1245/1245E has a built-in DIP switch (SW1), which is used to define each
card's unique identifier for Motion Utility. You can determine the BoardID identifier on
the register as shown in Table 3.1.
When there are multiple cards in the same chassis, this BoardID setting is useful for
identifying each card's unique device number.
We set the BoardID switch to 0 at the factory. If you need to adjust it to another num-
ber, set SW1 by referring to table 3.1.
= Off, = On, * = default
Table 3.1: BoardID Setting
Board ID Setting (SW1)
Board ID (Dec.) Switch Position
ID3 (1) ID2 (2) ID1 (3) ID0 (4)
*0 I I I I
1 I I I m
:
14 m m m l
15 m m m m
Bekijk gratis de handleiding van Advantech PCIE-1245E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1245E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1953 MB |
