Advantech PCIE-1164-AE handleiding
Handleiding
Je bekijkt pagina 13 van 18
BitFlow, Inc. • 400 West Cummings Park, Suite 5050 • Woburn, MA 01801 USA • +1-781-932-2900 • www.bitflow.com
Getting Started with the BitFlow SDK 6.6 13
I C
The following components are copied to your computer when
installing the full SDK.
Read Me - The latest information about the release
SysReg - System configuration utility: associates cameras with installed boards.
BitFlowPreview - Primary viewing application for all models and cameras.
BitFlowCapture - Sequence capture application based on the BufIn API
BFCom - HyperTerminal like application for camera communication through
the Camera Link board’s serial port.
CamEd - Camera configuration file editor for Gen 1 boards.
CamML - Camera configuration file editor for Gen 2 boards.
BFLog - Debug messages logging utility.
VerCheck - Displays DLL and driver version information as well as key system
parameters.
DLLs - Dynamic Link Libraries: these contain all of the functionality of the SDK.
BFGTL.cti - Gen<i>Cam GenTL producer. This is our generic Gen<i>Cam
interface module. Any Gen<i>Cam application can open the producer and
communicate with both the camera and the frame grabber. In other words,
this module supports both Camera Control (see Ximilon on page 15) and
Video Streaming.
clserbit.dll - Camera Link serial communications DLL. This is BitFlow product
specific and is located in the “\BitFlow SDK 6.6\Bin32” and/or “\BitFlow SDK
6.6\Bin64” folder. On 32-bit systems, only the 32-bit version is installed. On
64-bit systems the 64-bit version is installed (same file name) and the 32-bit
version is also installed if the option “Install 32-bit binaries on 64-bit Windows”.
is selected during the install process.
clallserial.dll - Camera Link serial communications middleware DLL. This is a
generic DLL that goes between the Camera venders application and the frame
grabber specific DLL (see above). This DLL is located in the “C:\Program Files\
CameraLink\Serial” folder. On 64-bit Windows, there will be a 32-bit version
of this DLL located in the “C:\Program Files (x86)\CameraLink\Serial” folder.
Camera Configuration Files - Used to configure the board for your cameras.
Kernel Driver - Provides access to the BitFlow hardware.
Documents - Text files with the detailed information about the release.
Source Code - Complete C and C++ source for all examples and user level DLLs.
Header files - Definitions required for the API.
Libraries - Link libraries for the Microsoft compliers.
Firmware - These files contain the logic that is download to the board’s FPGAs.
These are *.fsh files located in the “\Windows\System32\Drivers\BitFlowFlash”
folder.
Bekijk gratis de handleiding van Advantech PCIE-1164-AE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1164-AE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1746 MB |
