Advantech PCIE-1144-AE handleiding
Handleiding
Je bekijkt pagina 26 van 598
General Description CoaXPress Frame Grabbers
CXP-1-10 BitFlow, Inc. Version C.1
The Aon/Claxon/Cyton constantly monitors the current on each CXP link, if either
over current or under current conditions exist, the power will be turned off. The moni-
toring system is purely in hardware, so no host computer intervention is required in
order to safeguard the power source.
For situation where the camera requires more power than the PCIe bus can supply to
the frame grabber, the P4 connector can be use. This connector can be connect to the
PC’s power supply and all camera power will come from this connector.
Note: If the total amount of all cameras connected to the frame grabber exceeds 15
Watts, then the auxiliary power connector must be used. For example, if four single link
cameras each taking 4 watts are connected, then auxiliary power should be used.
Similarly, if a single camera quad link camera that takes 20 wats on to links is
connected, then auxiliary power must be used.
Note: Because the Aon-CXP has only one link, there is no need for auxiliary power. The
Aon-CXP can derive enough power from the PCIe bus to power one CXP link.
Note: The Claxon-Fiber does not provide power to a connected camera.
Bekijk gratis de handleiding van Advantech PCIE-1144-AE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCIE-1144-AE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 34568 MB |
