Advantech PCI-1780U handleiding
Handleiding
Je bekijkt pagina 12 van 40
PCI-1780U User Manual 6
2.1 Initial Unpacking Check
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
PCI-1780U card
Startup or User Manual
2.2 Hardware Installation and Configuration
2.2.1 Installation
Before you install your PCI-1780U, please make sure you have the following compo-
nents:
PCI-1780U-B card.
PCI-1780U-B User Manual.
Advantech DAQNavi SDK and the corresponding device driver.
Personal computer or workstation with PCI interface.
Accessories (optional)
– PCL-10168-1E 68-pin SCSI shielded cable, 1m
– PCL-10168-2E 68-pin SCSI shielded cable, 2m
– ADAM-3968-AE 68-pin DIN rail SCSI wiring board
When the necessary components are prepared, you can begin the installation proce-
dure as follows:
1. Install Advantech DAQNavi SDK and the corresponding device driver. They can
be downloaded from Advantech website.
2. Turn off the computer. (for PCI or PCIe cards only)
3. Install the hardware device.
4. Turn on the computer. (for PCI or PCIe cards only).
5. Use Navigator to test the functionality of the hardware.
6. Read software manual and examples.
7. Write your own applications.
Bekijk gratis de handleiding van Advantech PCI-1780U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCI-1780U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4254 MB |
