Advantech PCI-1752U handleiding
Handleiding
Je bekijkt pagina 9 van 38
3 PCI-1752U/ PCI-1752USO User Manual
Chapter 1 Introduction
Reset Protection
When the system has undergone a hot reset (i.e. without turning off the system
power), the PCI-1752U/ PCI-1752USO can either retain outputs values of each chan-
nel, or return to its default configuration as open status, depending on its on-board
jumper setting. This function protects the system from wrong operations during unex-
pected system resets.
1.3 Applications
Industrial ON/OFF control
Switch status sensing
BCD interfacing
Digital I/O control
Industrial and lab automation
1.4 Installation Guide
Before you install your PCI-1752U/ PCI-1752USO card, please make sure you have
the following necessary components:
PCI-1752U/ PCI-1752USO DAQ Card
PCI-1752U/ PCI-1752USO Startup or User Manual
Driver Software Advantech DAQNavi software (included in DVDROM)
Wiring Cable PCL-10250 or PCL-101100M (optional)
Wiring Board ADAM-3951 or ADAM-39100 (optional)
Computer PC or workstation with PCI bus slot
Other optional components are also available for enhanced operation:
Advantech DAQ tools, LabView or other 3rd-party software
After you get the necessary components and maybe some accessories for enhanced
operation for your DA&C card, you can then begin the Installation procedures. Figure
1.1 on the next page provides a concise flow chart to give users a broad picture of
the software and hardware installation procedures:
Note! For detailed specifications of the PCI-1752U/ PCI-1752USO, please
refer to Appendix A.
Bekijk gratis de handleiding van Advantech PCI-1752U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCI-1752U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4603 MB |
