Advantech PCI-1752U handleiding
Handleiding
Je bekijkt pagina 21 van 38
15 PCI-1752U/ PCI-1752USO User Manual
Chapter 3 Signal Connections
3.2.1 Board ID (SW1)
The PCI-1752U/ PCI-1752USO have a built-in DIP switch (SW1), which is used to
define each card’s board ID. When there are multiple cards on the same chassis, this
board ID switch is useful for identifying each card’s device number. After setting for
each PCI-1752U/ PCI-1752USO, you can identify each card in system with different
device numbers. The default value of board ID is 0 and if you need to adjust it to
other value, please set the SW1 by referring to Table 3.1.
Default Setting is 0.
3.2.2 Power On Configuration(JP1)
Default configuration after power on, and hardware reset is to set all the isolated out-
put channels to open status (the current of the load can’t be sink) so that the external
devices will not be damaged when the system starts or resets. When the system is
hot reset, then the status of isolated digital output channels are selected by jumper
JP1. Table 3.2 shows the configuration of jumper JP1.
Table 3.1: Board ID Setting (SW1)
BoardID (dec) Switch Position
* = default 1 (ID3) 2 (ID2) 3 (ID1) 4 (ID0)
0* ON ON ON ON
1ONONON OFF
2ONONOFF ON
3ONONOFF OFF
4ONOFFON ON
5ONOFFON OFF
6ONOFFOFF ON
7ONOFFOFF OFF
8 OFF ON ON ON
9 OFF ON ON OFF
10 OFF ON OFF ON
11 OFF ON OFF OFF
12 OFF OFF ON ON
13 OFF OFF ON OFF
14 OFF OFF OFF ON
15 OFF OFF OFF OFF
Table 3.2: Power on configuration after hot reset (JP1)
JP1 Power on configuration after hot reset
Default configuration ( Load default after hot reset )
Keep last status after hot reset
1
1
Bekijk gratis de handleiding van Advantech PCI-1752U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCI-1752U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4603 MB |
