Advantech PCI-1742U handleiding
Handleiding
Je bekijkt pagina 21 van 58
15 Chapter 2
2.5 Device Testing
After following the Setup and Configuration procedure to the last step
described in the previous section, you can now proceed to test the device
by clicking the Test Button on the Device Manager dialog box (Fig. 2-4).
2.5.1 Testing the Analog Input Function
Click the Analog Input tab to bring it up to the front of the screen. Select
the input range for each channel in the Input range drop-down boxes. Con-
figure the sampling rate on the scroll bar. Switch the channels by using the
up/down arrow.
Note You can configure the source of D/A reference volt-
age either as Internal or External, and select the
output voltage range. When selecting Internal volt-
age source, you have four options for the output
voltage range : 0~5V, 0~10V, +/-5V & +/-10V.
When selected as External, the output voltage
range is determined by the external reference volt-
age in the following way:
By inputting an external reference voltage: -xV ,
where |x| <= 10, you will get two available output
voltage ranges: 0~xV and -x~xV.
Note: You can access the Device Test dialog box through the
previous procedure for the Device Installation, or simply
by accessing Start/Programs/Advantech Automation/
Device Manager/Advantech Device Manager.
All functions are performed by the software polling
method. For high speed data acquirements or output,
functions have to use a corresponding VC example like
ADINT or ADBMDMA.
Bekijk gratis de handleiding van Advantech PCI-1742U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCI-1742U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5110 MB |
