Advantech PCI-1285 handleiding
Handleiding
Je bekijkt pagina 40 van 247
PCI-1285/1285E User Manual 32
5.3.4.2 External Drive
Click [External Dirve], a new form will appear as below, you can select an external
drive mode (JOG/MPG) to operate external drive.
Select JOG or MPG and click [Set Ext Drive], the external drive mode will be set and
you can operate external drive then. Click [Close], the form will be closed and the
external drive is set to “Disable”..
5.3.4.3 Axis Setup
Click the button to check/set the axis's attributes and I/O as follows:
The left tree view shows the classification of axis's properties, when you click the cor-
responding item, the right side, Data View, will list the properties and corresponding
property values in the category. For detail, refer to the description about Feature,
Configuration and Parameter of axis which are listed in property list of Programming
guide.The attributes are classified as follows:
Note! For PCI-1285/1285E, only axis 0 is available for external drive as
master axis.
Classification Name Brief Introduction
Alarm Alarm Enable Enables/Disables motion Alarm function for
source axis.
Alarm Logic Sets the active logic for alarm signal.
Alarm React Sets the reacting mode for alarm signal.
Bekijk gratis de handleiding van Advantech PCI-1285, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PCI-1285 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31021 MB |
