Handleiding
Je bekijkt pagina 7 van 54
vii PAX-121 User Manual
7. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet. Position the power cord so that people cannot
step on it. Do not place anything over the power cord. If the equipment is not
used for a long time, disconnect it from the power source to avoid damage by
transient over voltage.
8. If your computer does not keep the correct time or the BIOS configuration has
been reset to default, the battery may have no charge.
9. Improper installation of VESA mounting can result in serious personal injury!
VESA mount installation should be operated by professional technician, please
contact the service technician or your retailer if you need this service. The detail
operating procedure is specified in2.3.1 install VESA mounting.
10. Classification:
1). Class I power adapter
2). No applied part
3). Continuous Operation
4). Not AP or APG category
11. Environmental protection: follow national requirements to dispose of unit.
12. Maintenance: to properly maintain and clean the surfaces, use only the
approved products or clean with a dry applicator.
13. Make sure the user does not allow contact between SIP/SOPs and the patient
at the same time.
14. When networking with electrical devices, the operator is responsible for ensur-
ing that the resulting system meets the requirements set forth by the following
standards:
– EN 60601-1 (IEC 60601-1) Medical electrical equipment
Part 1: General requirements for safety
Caution! Do not leave this equipment in an uncontrolled environment where the
storage temperature is below 0° C (0° F) or above 50° C (122° F). This
may damage the equipment.
Caution! Do not replace battery yourself. Please contact a qualified technician or
your retailer.
The computer is provided with a battery- powered, real-time clock cir-
cuit. There is a danger of explosion if battery is incorrectly replaced.
Replace only with BR2032 or equivalent type recommended by the
manufacturer.
Discard used batteries according to the manufacturer’s instructions.
Warning! This device is not suitable for use in the presence of flammable anes-
thetic mixture with air, oxygen, nitrous oxide, or for life support systems.
Caution! When servicing the device, always use replacement parts that are quali-
fied to Advantech standards. Advantech Digital Healthcare cannot war-
rant or endorse the safe performance of third-party replacement parts
for use with our medical device.
Bekijk gratis de handleiding van Advantech PAX-121, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PAX-121 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4532 MB |
