Advantech MIC-770 V2 handleiding
Handleiding
Je bekijkt pagina 68 van 110
MIC-770 V2 User Manual 54
3.2.2.14 USB Configuration
Figure 3.32 USB Configuration
Legacy USB Support
This is to support USB devices under legacy OS such as DOS. When choosing
"Auto", the system will automatically detect if any USB device is plugged into the
computer and enable USB legacy mode when a USB device is plugged in and
disable USB legacy mode when no USB device is plugged in.
XHCI Hand-off
This is a workaround for OS without XHCI hand-off support. The XHCI owner-
ship change should be claimed by the XHCI driver.
USB Mass Storage Driver Support
Enable or Disable USB Mass Storage driver support.
USB transfer time-out
Allows you to select the USB transfer time-out value. [1, 5, 10, 20 sec]
Device reset time-out
Allows you to select the USB device reset time-out value. [10, 20, 30, 40 sec]
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. "Auto" uses the default value: for a Root port it is 100 ms, for a Hub
port the delay is taken from the hub descriptor.
Mass Storage Devices
Mass storage device emulation type. "Auto" enumerates devices according to
their media format. Optical drives are emulated as "CD-ROM" drives and no
media will be emulated according to a drive type.
Bekijk gratis de handleiding van Advantech MIC-770 V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | MIC-770 V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7714 MB |
