Advantech MIC-3840 handleiding
Handleiding
Je bekijkt pagina 23 van 28
15 MIC-3840 User Manual
Appendix A Pin Assignments and Jumper Settings
A.3 Jumper Settings
The MIC-3840 supports RS-232/422/485 communication modes, which can be
selected using the jumpers on the card. The corresponding chip on the card controls
the serial port's operation mode. Currently, the chip is an F81435AN, and the opera-
tion mode for each port can be controlled individually. The eight jumpers, labeled
J_COM1 through J_COM8, allow you to select the operation mode for each of the 8
ports by adjusting the jumper settings accordingly.
RS-232 mode jumper selection (Default setting):
JCOM4_2,JCOM5_2, JCOM6_2,JCOM7_2, JCOM8_2. The pin indicated
by the
Close Pin1 and Pin2, Pin3 and Pin4 of JCOM1_2, JCOM2_2,JCOM3_2 ,
triangle on PCB is Pin1.
RS-422 mode with Term-R jumper selection:
Close Pin3 and Pin4,Pin5 and Pin6 of JCOM1_1, JCOM2_1,JCOM3_1,
JCOM4_1,JCOM5_1, JCOM6_1,JCOM7_1, JCOM8_1. The pin indicated by the
triangle on PCB is Pin1.
Table A.3: Jumper Settings
Resistors Allocation for Mode (RS422/RS485)
JCOM*_1 Status
3-4,5-6 Enable Bias-R(default)
1-3,5-6 Enable Term-R and Bias-R
JCOM*_2 Mode
1-2,3-4 Pure RS-232(default)
3-4,5-6
RS-422 Full Duplex
Check Table 2 for choosing the related resistor.
1-2,5-6
RS-485 Half Duplex
Check Table 2 for choosing the related resistor.
Bekijk gratis de handleiding van Advantech MIC-3840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | MIC-3840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4024 MB |
