Advantech MIC-1810 handleiding
Handleiding
Je bekijkt pagina 15 van 48
7 MIC-1810 User Manual
Chapter 2 Hardware Overview
2.5 USB Connector
The USB interface supports Plug and Play, which enables you to connect or discon-
nect a device whenever you want, without turning off the computer. The MIC-1810
provides four connectors of USB interfaces, which gives complete Plug & Play and
hot swapping for up to 127 external devices. Two of the four connectors on MIC-1810
and one of the four connectors on MIC-1810 are USB 3.0 standard. The USB inter-
face complies with USB EHCI, Rev. 2.0 compliant. The USB interface can be dis-
abled in the system BIOS setup.
2.6 HDMI Display Connector
The MIC-1810 provides a HDMI controller for a high resolution interface. The MIC-
1810 supports up to full HD resolution for two independent displays. DisplayPort is
also available on a per-project basis.
2.7 RTC Battery Specification
The MIC-1810 has an RTC battery to ensure BIOS settings and system clock can be
retained, even when power is disconnected for a short time.
Typical Voltage: 3.0 V
Normal discharge capacity: 210 mAh
2.8 Reset Button
Press the “Reset” button to reset/restart the MIC-1810.
Bekijk gratis de handleiding van Advantech MIC-1810, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | MIC-1810 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4750 MB |
