Advantech LEO-S592-AQ handleiding
Handleiding
Je bekijkt pagina 20 van 32
www.advantech.com
20
check if the network is disconnected; if there is no response for 8 times (8 * 30 mins = 240 mins
=4 hours), the device will record a data lost time point( disconnection time minus 4 hours).
4. After the network connected back, the device will send the lost data from the point in time when
the data was lost according to the reporting interval.
Note:
1) If the device is rebooted or re-powered when data retransmission is not completed, the device
will re-send all retransmission data again after device is reconnected to the network;
2) If the network is disconnected again during data retransmission, it will only send the latest
disconnection data;
3) The retransmission data format is started with “20ce”, please refer to see section 6.4.
4.6 Maintenance
4.6.1 Upgrade
ToolBox Software:
1. Download firmware from www.Advantech-iot.com to your PC.
2. Go to “Maintenance -> Upgrade” of ToolBox software, click “Browse” to import firmware and
upgrade the device. You can also click “Up to Date” to search for the latest firmware of the
device and upgrade.
Bekijk gratis de handleiding van Advantech LEO-S592-AQ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | LEO-S592-AQ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4130 MB |
