Advantech LEO-S572-TP handleiding
Handleiding
Je bekijkt pagina 8 van 17
www.advantech.com
8
8
4. Operation Guide
4.1 Log in the ToolBox
LEO-S572-TPG0 can be monitored and configured via ToolBox App or ToolBox software.
Before configuration, ensure the insulating sheet inside the device has be pulled out and
battery is not placed reversed.
4.1.1 NFC Configuration
1. Download and install “Advantech ToolBox” App from Advantech website.
2. Enable NFC on the smartphone and launch Advantech ToolBox.
3. Attach the smartphone with NFC area to the device to read device information. Basic
information and settings of the device will be shown on ToolBox App if it’s recognized
successfully. You can read and configure the device by tapping the Read/Write device on the
App. In order to protect the security of the device, please change password when first
configuration. The default password is 123456.
Note:
1) Ensure the location of smartphone NFC area and it’s recommended to take off phone case.
2) If the smartphone fails to read/write configurations via NFC, keep the phone away and back
to try again.
3) LEO-S572-TPG0 can also be configured by dedicated NFC reader, which can be
purchased from Advantech.
Bekijk gratis de handleiding van Advantech LEO-S572-TP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | LEO-S572-TP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2204 MB |
