Advantech LEO-S572-TP handleiding
Handleiding
Je bekijkt pagina 6 van 17
www.advantech.com
6
6
2.4 Power Button
Note: The LED indicator and power button are inside the device. Switch on/off and reset can
also be configured via NFC.
Function
Action
LED Indication
Turn On
Press and hold the button for more than 3 seconds.
Off → On
Turn Off
Press and hold the button for more than 3 seconds.
On → Off
Reset
Press and hold the button for more than 10 seconds.
Blink 3 times.
Check
On/Off Status
Quickly press the power button.
Light On: Device is on.
Light Off: Device is off.
2.5 Pinouts
For parts of LEO-S572-TPG0 sensors, you need to connect the sensor part to
LEO-S572-TPG0 transceiver according to the pinouts. You can also find pinouts label on the
motherboard.
3. Device Assembly
For parts of models, you need to connect sensor to the LEO-S572-TPG0 transceiver to make
the whole device work.
1. Take off the mounting bracket on the transceiver, remove the screws, rubber seal and cover
on the bottom of the device.
PIN
PT100
1
White/GND
2
---
3
---
4
Red/PT1
5
Red/PT2
6
---
Bekijk gratis de handleiding van Advantech LEO-S572-TP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | LEO-S572-TP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2204 MB |
