Advantech LEO-S552-TP handleiding
Handleiding
Je bekijkt pagina 8 van 27
www.advantech.com
8
8
2.4 Screen Description
Note:
⚫ The screen is only displayed when the temperature sensor is connected to the
LEO-S552-TPG0, and the screen is turned off when no sensor is connected or only when
connected to the magnet switch sensor.
⚫ The screen can be enabled/disabled by downlink commands.
OSD
Description
Time.
Temperature Threshold Trigger Alarm
Door Opening/Closing Alarm
Battery Level
LoRaWAN
®
Network is Activated
Temperature of Channel 1/Channel 2
3. Operation Guide
3.1 Configuration
3.1.1 Configured By NFC
1. Download and install “Advantech ToolBox” App on an NFC-supported smart phone.
2. Open “Advantech ToolBox” App and attach the NFC area of the smart phone to the device.
Click “NFC Read” to read the device and click “Write” to configure the device settings. It’s
suggested to change the default password for security reasons. (Default password:
123456).
Note:
1) Ensure the location of the smartphone NFC area and it’s recommended to take off the phone
case.
2) If the smartphone fails to read/write configurations via NFC, move it away and try again later.
3.1.2 Configured by USB
1. Download ToolBox software from Advantech’s official website.
2. Remove the USB waterproof plug from the bottom of the device, and connect it to the
Bekijk gratis de handleiding van Advantech LEO-S552-TP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | LEO-S552-TP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3382 MB |
