Advantech LEO-S550-DA handleiding
Handleiding
Je bekijkt pagina 12 van 31
www.advantech.com
12
12
data once.
Rejoin Mode
Reporting interval ≤ 30 mins: the device will send a specific number of
LinkCheckReq MAC packets to the network server with periodic or threshold
uplinks everytime more than 25~35 mins passes to validate connectivity; If
there is no response, the device will re-join the network.
Reporting interval > 30 mins: the device will send a specific number of
LinkCheckReq MAC packets to the network server every reporting interval to
validate connectivity; If there is no response, the device will re-join the
network.
Set the number of
packets sent
When rejoin mode is enabled, set the number of LinkCheckReq packets sent.
Note: the actual sending number is Set the number of packet sent + 1.
ADR Mode
Allow network server to adjust datarate of the device.
Tx Power
Transmit power of device.
Note:
1) Only OTAA mode supports rejoin mode.
LoRaWAN Frequency Settings:
Go to LoRaWAN Settings > Channel to select supported frequency and select channels to
send uplinks. Make sure the channels match the LoRaWAN
®
gateway.
Note: When Single-Channel Mode is enabled, only one channel can be selected to send
uplinks and the ADR will not work.
If frequency is one of AU915/US915, you can enter the index of the channel that you want to
enable in the input box, making them separated by commas
Bekijk gratis de handleiding van Advantech LEO-S550-DA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | LEO-S550-DA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4007 MB |
