Advantech ITA-580G handleiding
Handleiding
Je bekijkt pagina 6 van 108
ITA-580/580G User Manual vi
20. In accordance with the IEC 704-1:1982 specifications, the sound pressure level
at the operator’s position does not exceed 70 dB (A).
21. Connecting earth ground to the equipment.
WARNING: The equipment has a separate protective earthing terminal on the
chassis that must be permanently connected to earth ground to adequately
ground the chassis and protect the operator from electrical hazards.
Caution: Before equipment installation, ensure that service personnel have
attached an appropriate grounding lug to the grounding cable supplied.
To connect earth ground to equipment:
(1) Connect one end of the grounding cable to a proper earth ground.
(2) Place the ground lug attached to the ground cable over the protective earth-
ing terminal.
(3) Secure the grounding lug to the protective earthing terminal with washers
and screws.
(4) Dress the grounding cable and ensure that it does not touch or block access
to other components.
WARNING: Before powering on the equipment, connect the frame of the equip-
ment to earth. For the earthing wire, green and yellow insulation is required and
the cross-sectional area of the conductor must be more than 0.75 mm
2
or 18
AWG.
WARNING: For protective earthing terminals featuring washers and screws,
where a screw is threaded onto it must not be less than twice the pitch of the
screw thread (at least 3.5 mm in diameter). Star washers or spring washers can
be used.
WARNING: After powering off the equipment and disconnecting the power sup-
ply. Then disconnect the equipment frame from the earth.
22. This product is intended to be supplied by a Listed DC power source, rated 24-
110Vdc, 3.8-0.8A minimum, Tma 70 degree C minimum, if need further assis-
tance, please contact Advantech for further information
23. The equipment is not intended to be installed and used in a home, school or
public area accessible to the general population.
24. The knurled thumbscrews with slotted heads for each Node module should be
tighten the screws with a tool after both initial installation and subsequent using.
警告：為避免電磁干擾，本產品不應安裝或使用於住宅環境。
DISCLAIMER: These instructions are provided in accordance with IEC 704-1 specifi-
cations. Advantech disclaims all responsibility for the accuracy of any statements
contained herein.
Bekijk gratis de handleiding van Advantech ITA-580G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ITA-580G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15279 MB |
