Advantech ITA-460 handleiding
Handleiding
Je bekijkt pagina 22 van 82
ITA-460 User Manual 10
2.2.2.1 Clear CMOS
ITA-460 single board computer contains a jumper that can erase CMOS data and
reset the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its default setting.
2.2.2.2 System AT/ATX mode function option
ITA-460 supports AT or ATX mode and default is ATX module. If you want to change
to AT mode you can find AT/ATX mode jumper on the motherboard.
2.2.2.3 System ME Mode function option
ITA-460 supports ME Enable & Disable and the default is “Disable”. If you want to
change the ME mode you can set ME mode jumper on the motherboard
Table 2.2: JCMOS1 (Clear CMOS Settings)
CMOS1 Clear CMOS
Footprint 3 x 1 Pin
Setting Function
(1-2) Normal (Default)
(2-3) Clear CMOS
Table 2.3: PSON1 (System AT/ATX mode option)
PSON1 System AT/ATX mode option
FootPrint 3 x 1 Pin
Setting Function
(1-2) AT module
(2-3) ATX module
Table 2.4: JME1 (System ME mode option)
JME1 System ME mode option
FootPrint 3 x 1 Pin
Setting Function
(1-2) ME Enable (Default)
(2-3) ME Disable
Bekijk gratis de handleiding van Advantech ITA-460, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ITA-460 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27609 MB |
