Handleiding
Je bekijkt pagina 24 van 26
IDP31-070WP50(1K)HIA1 User Manual 16
A.1 Introduction
If the monitor is malfunctioning or does not operate according to the user manual,
refer to the following instructions before calling the Advantech service center.
If unable to resolve the issues using the instructions provided below, please contact
your distributor or the Advantech service center.
A.2 Troubleshooting
The image is displayed incorrectly / the full screen image does not appear
Ensure that the screen resolution on the motherboard is correct.
The screen image is not centered
Adjust the horizontal and vertical positioning.
Out of range
If an “Out of Range” message appears onscreen, this indicates that the display
output signal is not compatible with the LCD display (for example, the output
resolution exceeds the LCD display resolution).
Adjust the output signal resolution settings to match the correct resolution.
No signal
The display is powered on but is not receiving or displaying output signals from
the computer. Check all power switches, power cables, and HDMI cable and
ensure that both ends of all cables are properly connected.
Going to sleep
If the system goes to sleep, either the display has been set to power-saving
mode or is experiencing a sudden signal disconnection problem. Check the
BIOS system settings and/or Windows configuration. Then check that both ends
of the power cable are connected to the computer.
Bekijk gratis de handleiding van Advantech IDP31-070W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | IDP31-070W |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3053 MB |
