Advantech IDK-1110R-50XGB1 handleiding

45 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 17 van 45
11 IDK-1110R-50XGB1 User Manual
Chapter 2 LCD Display
2.4 Backlight Unit
The following characteristics are measured under stable conditions at 25 °C (77 °F).
Table 2.2: Backlight Driving Conditions
Parameter Symbol
Values
Unit Note
Min. Typ. Max.
Converter Power Supply Voltage Vi 10.8 12 13.2 V
Converter Power Supply Ripple Voltage ViRP - - 350 mV
Converter Power Supply Current Ii - 0.48 0.55 A
@ Vi = 12V
(Duty 100%)
Converter Inrush Current IiRUSH - - 3.0 A
@ Vi rising
time =10ms
(Vi =12V)
Backlight Power Consumption PBL - 5.8 6.6 W
@ Vi = 12V
(Duty 100%)
EN Control Level
Backlight On
BLON
2.5 3.3 5 V
Backlight Off 0 - 0.3 V
PWM Control Level
PWM High Level
E_PWM
2.5 3.3 5 V
PWM Low Level 0 - 0.15 V
PWM Noise Range VNoise - - 0.1 V
PWM Control Duty Ratio
-
5 - 100 %
(2), Sugges-
tion,
@190Hz<fP
WM<1kHz
20 - 100 %
(2), @
1kHz?fPWM
<20kHz
PWM Control Frequency fPWM 190 200 20k Hz (3)
LED Life Time LL 50,000 - - Hrs (2)
Note (1) LED current is measured by utilizing a high-frequency current meter
shown below:
Note (2) At 190 ~1kHz PWM control frequency, duty ratio range is restricted from
5% to 100%.
1K ~20kHz PWM control frequency, duty ratio range is restricted from
20% to 100%.
If PWM control frequency is applied in the range from 1KHz to 20KHZ,
The "non-linear" phenomenon on the Backlight Unit may be found. So
It's a suggestion that PWM control frequency should be less than 1KHz.

Bekijk gratis de handleiding van Advantech IDK-1110R-50XGB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAdvantech
ModelIDK-1110R-50XGB1
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4571 MB

Caratteristiche Prodotto

Kleur van het productZwart
In hoogte verstelbaarNee
Beeldschermdiagonaal10.4 "
Resolutie1024 x 768 Pixels
TouchscreenJa