Handleiding
Je bekijkt pagina 34 van 45
IDK-1110R-50XGB1 User Manual 28
4.1 Touch Controller Characteristics
The Advantech ETM-RES05C Touch Control Board is the ultimate combo board.
This touch panel controller provides optimum performance for your analog resistive
touch 4-wire model panels. It communicates with the PC directly through USB and
RS-232 connectors. You can see how superior the design is through its sensitivity
accuracy and user-friendly operation. The touch panel driver emulates left and right
mouse-button functions and supports all the OS listed in section 4.2 under USB Inter-
face.
4.2 Specifications
Electrical Features
+5 Vdc/100mA typical, 50mV peak to peak maximum ripple and noise
Bi-directional RS-232 serial communication and USB 1.1 full speed
Report rate of RS-232 is 180 points/sec (max.). USB is 200 points/sec (max.).
Unaffected by environmental EMI
Panel resistance of the 4-wire resistive model is from 50- to- 200Ω (pin to pin on
the same layer)
Touch resistance under 3kΩ
Serial Interface
EIA 232E (Serial RS-232)
No parity, 8 data bits, 1 stop bit, 9600 baud (N, 8, 1, 9600)
Supports Windows 2000/Vista/XP/7, Windows CE 5.0/6.0/7.0, Windows NT4,
Linux, DOS, QNX
USB Interface
Conforms to USB Revision 1.1 full speed.
If the USB is connected to the controller, the controller will communicate over
the USB, and will not communicate over the serial port.
Supports Windows 2000/Vista/XP/7, Windows CE 5.0/6.0/7.0, Linux, QNX.
Touch Resolution
2048 x 2048 resolution
Response Time
Max. 20 ms
Bekijk gratis de handleiding van Advantech IDK-1110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | IDK-1110 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4810 MB |
