Advantech iDAQ-801 handleiding
Handleiding
Je bekijkt pagina 27 van 46
17 iDAQ-801_841 User Manual
Chapter 3 Function Details
Both the start trigger and the stop trigger can come from a software command or a
hardware signal. If a hardware signal is used, the start (for the start trigger) or the
stop (for the stop trigger) of the acquisition can also be delayed. Refer to the device
specifications for possible signal sources.
3.2.3 Re-triggerable Analog Input Acquisition
The acquisition can be re-triggerable. When re-trigger is enabled, after the acquisi-
tion stops, it restarts whenever the required trigger is received, and reconfiguration of
the acquisition is not required.
Figures 3.10 to 3.13 show examples of re-trigger acquisition for post-trigger, pre-trig-
ger, about-trigger, and streaming acquisitions, respectively. In a post-trigger acquisi-
tion, a start trigger is ignored while the acquisition is in progress. In an about-trigger
acquisition, a stop trigger is ignored while the acquisition is being stopped.
Figure 3.10 Post-trigger acquisition with re-trigger.
Figure 3.11 Pre-trigger acquisition with re-trigger.
Figure 3.12 About-trigger acquisition with re-trigger.
Bekijk gratis de handleiding van Advantech iDAQ-801, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | iDAQ-801 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3491 MB |
