Advantech FWA-1013 handleiding
Handleiding
Je bekijkt pagina 25 van 71
Copyright 2023 Advantech Co. Ltd. All rights reserved.
H. If the connection is successful, after powering on the unit, you should be able to view the
BIOS Power-On-Self-Test (POST) screen in the PuTTY terminal as below:
Figure 2.4-9 BIOS POST Screen
Note:
Please be aware that during the initial startup phase, the BIOS may be performing
tasks even if the console appears inactive. It might take a moment for the BIOS POST
screen to show up. However, the BIOS has been optimized for a swift boot time. It will
progress through the POST rapidly and then attempt to boot an OS based on the boot
options selected in the BIOS.
In case you would extend the time, the BIOS displays the POST screen and waits for a key press to
enter the setup menu, you can do so via the BIOS setup menu. Please refer to Section 4.2 for details.
2.4.3 Installation via iKVM
The FWA-1013 is equipped with Out-of-band (OOB) BMC that features a Web UI, providing a wide
range of configuration options, including iKVM for graphic OS installations.
To initiate, set up the BMC IP within the BIOS (please reference to Section 4.3.1) and then access it
using https://<IP>. Once there, you have the capability to remotely install either a text-based or GUI-
based OS onto your PC.
For details guide on iKVM features, please refer the “Node Explorer user manual (Section 3.5.3)”.
Bekijk gratis de handleiding van Advantech FWA-1013, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | FWA-1013 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18815 MB |
