Advantech EPM-880 handleiding
Handleiding
Je bekijkt pagina 43 van 48
35 EPM-880 User Manual
Chapter 3 Software Specifications
<image path>: Users must make sure the image path exists in the user’s operating
system and the file has been put into this path. If file is not in this path, the EPD appli-
cation may lead to errors.
<img>: Write the image name between <img> </img> and the image file should put
in the image path. It can be assigned more than one tag name between <full_up-
date> and </full_update>. The EPD application will display the image in sequence. It
only supports .bmp and jpg extension types.
<stop>: Stop tag is used to load an image immediately. EPD application is termi-
nated after 1.bmp update is done. In carousel mode, the stop tag must be removed
from content in xml.
<slide_interval>: Slide interval is the delay time in seconds between every image
display.
<set_temperature>: 0 is disable. Users should not change this to other values.
<waveform_mode>: Waveform mode. Usually choose mode 2 for image refresh.
<rotate>: The image will present different rotations on the panel and there are only 4
options to choose from: 0, 90, 180 and 270° degrees of angle.
Execute EPD application
Make sure the image path exists in the host system before executing the program or
the EPD application may generate errors.
1. Open command line.
Bekijk gratis de handleiding van Advantech EPM-880, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | EPM-880 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12170 MB |
