Advantech EPD-230 handleiding

82 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 19 van 82
9 EPD-230/232 User Manual
Chapter 2 EPD-230, EPD-232 Network Specification
2.4.2 Registration
Router
Router Power on
System gets EPD Hub Configure from webpage
Router connects to DeviceOn/ePaper
EPD Device
Default setting for shipping: Supports 11 channels.
Power on auto check if a router exists and asks to join the network.
Router permits EPD device to join if it is on the whitelist.
EPD device joins the network
2.4.3 Status report
Router (WIS-3240) will report status every 1 mins.
EPD device will report status every 1 mins.
2.4.4 Execute actions Cmd
Router will receive action commands from the router in real-time.
EPD device sends data requests every 20 secs from sleep mode to router to
check if there are any action commands.
EPD device will send back the ACK turn result if the action command is exe-
cuted.
2.5 Whitelist mechanism
Before importing the whitelist, the user needs to setup a router channel which can
provide optimal performance. Users can setup the channel from DeviceOn/ePaper
and the router channels are: 11 13 14 15 20 21 22 23 24 25 26. If the channel has not
been set, the router will be set to the default channel of 15.
(1). When a user receives the goods, it comes with an EPD device whitelist. Users
need to import the list from DeviceOn/ePaper.
(2).DeviceOn/ePaper can dispatch the list to the connected system daemon in the
Router.
(3) EPD device can auto join the network after the whitelist has been properly setup
in DeviceOn/ePaper and Router.
Note! End users need to be aware which 2.4Ghz wi-fi channels have been
used to avoid to using the same channels.

Bekijk gratis de handleiding van Advantech EPD-230, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAdvantech
ModelEPD-230
CategorieNiet gecategoriseerd
TaalNederlands
Grootte18454 MB