Advantech EPC-S101 handleiding
Handleiding
Je bekijkt pagina 16 van 64
EPC-S101 User Manual 6
2.1 Introduction
The following section shows the external and internal connectors pin assignment for
application.
2.2 Connectors
2.2.1 Front and Rear I/O Connectors
2.2.1.1 LED Indicators
There are two LEDs on the front panel that indicate system status: The thermal LED
is for system thermal alarm status; and HDD LED is for HDD and compact flash disk
status.
2.2.1.2 HDMI Connector
An integrated, 19-pin receptacle connector HDMI Type A Interface is provided. The
HDMI link supports resolutions up to 1920 x 1200 @ 60 Hz.
2.2.1.3 VGA Connector
EPC-S101 provides an integrated 15-pin female VGA digital video interface, which
supports up to 1920 x 1200 @ 60 Hz. Please refer to Table 2.10 for its pin assign-
ments.
2.2.1.4 USB2.0 Connector
EPC-S101 provides two USB2.0 interface connectors, which give complete Plug &
Play and hot swapping for up to 127 external devices. The USB interface complies
with USB UHCI, Rev. 2.0 compliant. The USB interface can be disabled in the system
BIOS setup. Please refer to Table. 2.2 for its pin assignments. The USB connectors
are used to connect any device that conforms to the USB interface. Most digital
USB 2.0 USB 3.0 HDMI VGA LAN1 LAN2 Antenna Hole
USB 2.0
RS-232
RS-232/422/485
Antenna Hole
Power BuƩon
12V DC in
MIC
Line-out
Digital I/O
Line-in
Bekijk gratis de handleiding van Advantech EPC-S101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | EPC-S101 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9679 MB |
