Advantech ECU-1370 handleiding
Handleiding
Je bekijkt pagina 14 van 28
ECU-1370 Series User Manual 4
1.2.4 Relay Output
Channel: 6
Connectors Type: Terminal blocks
Relay Type: 4 x Form A, 2 x Form C
Contact Rating: 30 V
DC
@ 3A
Mechanical endurance: 1 x 10
7
operations
Isolation between open contacts: 750VAC for 1 minute
Flyback diode: YES
Relay On Time: 10 ms
Relay Off Time: 5 ms
Insulation Resistance: 100MΩ min. at 500 V
DC
LED State: NO
1.2.5 Ethernet
Connectors: 3 x RJ-45
Speed: 10/100/1000 Base-T
LED State: Green (Link)/Orange or Green (Speed)
1.2.6 RS485
Channel: 1
Connectors Type: Terminal blocks
Wiring: 2-wired (D+, D-, GND)
LED State: TX1/RX1
Baud Rate: 300 bps to 921.6 Kbps
1.2.7 CAN
Channel: 1
Connectors Type: Terminal Blocks
Wiring: 2-wired (CAN+, CAN-, GND)
Baud Rate:
– High Speed CAN: 40 Kbps to 1 Mbps
– Low Speed/Fault Tolerant CAN: 40 Kbps to 125 Kbps
1.2.8 1-Wire Master
Channel: 1 (maxim integrated, DS2482-100)
Connectors Type: Terminal Blocks
Wiring: 1-wired
Isolation: YES
1.2.9 Output Voltage
Channel: 1 x 5V
DC
@ 1W
Connectors Type: Terminal Blocks
1.2.10 Software & Firmware
Operation System: Ubuntu 22.04, Kernel 5.X
I/O FW/Driver: ver: 01010101
OTA: YES
Bekijk gratis de handleiding van Advantech ECU-1370, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ECU-1370 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2546 MB |
