Advantech ECU-1252 handleiding
Handleiding
Je bekijkt pagina 5 van 32
v ECU-12XX Series User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If any of the following occurs, have the equipment checked by service person-
nel:
– The power cord or plug is damaged.
– Liquid has penetrated the equipment.
– The equipment has been exposed to moisture.
– The equipment is malfunctioning, or does not operate according to the user
manual.
– The equipment has been dropped and damaged.
– The equipment shows obvious signs of breakage.
15. Do not leave the equipment in an environment with a storage temperature of
below -25° C (-13° F) or above 70° C (158° F) as this may damage the compo-
nents. The equipment should be kept in a controlled environment.
16. Due to the sensitive nature of the equipment it must be stored in a restricted
access location, only accessible by qualified engineers.
17. The equipment does not include a power cord and plug.
18. In accordance with IEC 704-1:1982 specifications, the sound pressure level at
the operator's position does not exceed 70 dB (A).
19. By means of power cord connected to a socket-outlet with earthing connection.
Au moyen d'un cordon d'alimentation relié à une prise de courant avec mise à la
terre.
20. The terminal block is suitable for 26-16 AWG. Torque value 2.5 lb-in User copper
conductors only. Terminal block Shall be installed by skilled person.
21. This product is intended to be supplied by an UL Listed DC power source suit-
able for use at Tma 70.0 °C min. whose output meets PS2 (or LPS), ES1 (or
SELV) and is rated: 10-30 Vdc min, 1.5-0.5 A min.
22. DISCLAIMER: These instructions are provided according to IEC 704-1 stan-
dards. Advantech disclaims all responsibility for the accuracy of any statements
contained herein.
Bekijk gratis de handleiding van Advantech ECU-1252, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ECU-1252 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3497 MB |
