Advantech BB-SR31019420 handleiding
Handleiding
Je bekijkt pagina 33 van 62
SmartFlex SR310
5.9.8 Ethernet Ports (ETH0 and ETH1)
The panel socket RJ45 is used for this interface. The isolation barrier of the Ethernet signal
ports against the ground is 1500 V.
Pin 10base-T & 100base-T PoE (Mode B)
1 Tx+ (Transmit Data+) —
2 Tx- (Transmit Data-) —
3 Rx+ (Receive Data+) —
4 — PoE + (positive pole)
5 — PoE + (positive pole)
6 Rx- (Receive Data-) —
7 — PoE - (negative pole)
8 — PoE - (negative pole)
Table 15: Ethernet connector pinout
Figure 34: Ethernet connector
The crossover UTP cable (Ethernet cable) plugs into the RJ45 connector labeled as ETH0
or ETH1 (see the figure below).
Figure 35: Connection of Ethernet cable
The insulation strength of Ethernet ports from each other and from the rest of the router
(grounding) is dependent on the router version:
Router Version Insul. Strength from Router Insul. Strength between Ports
Without PoE 1.5 kV 1.5 kV
PoE PSE none none
Table 16: Insulation strength of Ethernet ports
26
Bekijk gratis de handleiding van Advantech BB-SR31019420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | BB-SR31019420 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9523 MB |
