Advantech BB-SR30819125-SWH handleiding
Handleiding
Je bekijkt pagina 28 van 61
SmartFlex SR308
5.9.3 Antenna connector ANT, DIV, GPS and WiFi
The main, diversity and GPS antennas are connected to the router using the SMA connec-
tor on the front panel. There is also an R-SMA antenna connector available, through which an
additional antenna can be connected, if the router is equipped with a WiFi module.
The ANT connector is used to First, connect the main antenna to the router. To connect the
diversity antenna, the second antenna connector DIV is used. The third connector (GPS) is
intended for a GPS antenna (the router supports active GPS antennas). An R-SMA connector
named WiFi is designed for the connection of a WiFi antenna (available only for versions with
a WiFi module).
The router can not operate without a main antenna connected through the port marked
as ANT !
The DIV celullar antenna is required for the MIMO DL functionality.
An SMA connector is used for the connection of the antenna. The antenna is connected by
screwing this antenna to the SMA connector on the router’s front panel (see the figure below).
Figure 23: Connecting the antenna
A diversity antenna improves the radio capability of the router at low signal strength.
21
Bekijk gratis de handleiding van Advantech BB-SR30819125-SWH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | BB-SR30819125-SWH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8773 MB |
