Advantech ARK-3520L handleiding
Handleiding
Je bekijkt pagina 20 van 76
ARK-3520L User Manual 10
2.1 Introduction
The following sections show the internal jumpers setting and the external connectors
pin assignment for application.
2.2 Jumpers
2.2.1 Jumper Description
You may configure ARK-3520L to match the needs of your application by setting
jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two
metal pins and a small metal clip (often protected by a plastic cover) that slides over
the pins to connect them. To close a jumper, you connect the pins with the clip. To
open a jumper, you remove the clip. Sometimes a jumper will have three pins,
labeled 1, 2 and 3. In this case you would connect either pins 1 and 2, or 2 and 3.
The jumper settings are schematically depicted in this manual as follows.
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes. Generally, you
simply need a standard cable to make most connections.
2.2.2 Jumper List
closed 2-3closedopen
12 12
closed 2-3closedopen
Table 2.1: Jumper List
J1 Auto Power On Setting
J2 mSATA/PCIe Setting
CN4 COM2 RS-232 Power Setting
CN6 COM1 RS-232 Power Setting
Bekijk gratis de handleiding van Advantech ARK-3520L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ARK-3520L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9793 MB |
