Advantech AIMB-588 B1 handleiding
Handleiding
Je bekijkt pagina 19 van 140
9 AIMB-588 B1 User Manual
Chapter 1 General Information
1.8 Jumper Settings
This section provides instructions on how to configure your motherboard by setting
the jumpers. It also includes the motherboard’s default settings and your options for
each jumper.
1.8.1 How to Set Jumpers
Users can configure your motherboard to match the needs of your application by set-
ting the jumpers. A jumper is a metal bridge that closes an electrical circuit. It consists
of two metal pins and a small metal clip (often protected by a plastic cover) that slides
over the pins to connect them. To “close” (or turn ON) a jumper, you connect the pins
with the clip. To “open” (or turn OFF) a jumper, you remove the clip. Sometimes a
jumper consists of a set of three pins, labeled 1, 2, and 3. In this case you connect
either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when set-
ting jumpers.
1.8.2 Flash Descriptor Security Override Setting Jumper (ME1)
1.8.3 CMOS Clear Jumper (JCMOS1)
Function Jumper Setting
Disable Flash Descriptor
Security (Default)
1 2 3
Enable Security measures defined in
the Flash Descriptor.
1 2 3
Pin Signal Pin Definition
1 VBAT
2 RTC RESET#
3 GND
Function Jumper Setting
Keep COMS Data (Default)
1 2 3
Clear CMOS Date
1 2 3
Bekijk gratis de handleiding van Advantech AIMB-588 B1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | AIMB-588 B1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27166 MB |
