Advantech AIMB-2710 handleiding
Handleiding
Je bekijkt pagina 18 van 96
AIMB-2710 User Manual 10
1.8.7 Flash Descriptor Security Override Pin Header (JME1)
1.9 System Memory
AIMB-2710 has two sockets for a 262-pin DDR5 CSODIMM. These sockets use a 1.2
V unbuffered double data rate synchronous DRAM (DDR SDRAM). DRAM is avail-
able in capacities of 8GB, 16GB, 32GB and 48GB. The sockets can take any combi-
nation with CSODIMMs of any size, giving a total memory size between 8GB, 16GB,
32GB, 64GB, up to max 96GB. AIMB-2710 does NOT support error checking and
correction (ECC).
1.10 Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
“open” position, i.e., the handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket. Then firmly but gently (avoid pushing
down too hard) press the DIMM module well down into the socket, until you hear a
click when the two handles have automatically locked the memory module into the
correct position of the DIMM socket. To remove the memory module, just push both
handles outward, and the memory module will be ejected by the mechanism.
Table 1.10: JME1
Function Jumper Setting
Disable Flash Descriptor Security (Default)
Enable Flash Descriptor Security
Bekijk gratis de handleiding van Advantech AIMB-2710, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | AIMB-2710 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7470 MB |
