Advantech AIIS-3400 handleiding
Handleiding
Je bekijkt pagina 19 van 90
5 AIIS-3400/3410 User Manual
Chapter 1 General Introduction
1.3.13 Physical Characteristics
For AIIS-3410P/U
Dimension: 240 x 97 x 190 mm (9.45" x 3.82" x 7.48")
Weight: 2.4 kg (5.29 lb, w/o CPU cooler)
For AIIS-3400P/U
Dimension: 230x 70 x 175 mm(9.06" x 2.76" x 6.89")
Weight: 1.8 kg (3.97 lb, w/o CPU cooler)
1.3.14 EMC
CE, FCC, CCC, BSMI
1.3.15 Safety
UL, CB, CCC, BSMI
1.4 Jumper Settings
1.4.1 How to Set Jumpers
You can configure your motherboard to match the needs of your application by set-
ting the jumpers. A jumper is a metal bridge that closes an electrical circuit. It consists
of two metal pins and a small metal clip (often protected by a plastic cover) that slides
over the pins to connect them. To “close” (or turn ON) a jumper, you connect the pins
with the clip. To “open” (or turn OFF) a jumper, you remove the clip. Sometimes a
jumper consists of a set of three pins, labeled 1, 2 and 3. In this case you connect
either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when set-
ting jumpers.
1.4.2 BIOS CMOS (JCMOS1)
The AIIS-3400/3410 CPU card contains a jumper that can erase BIOS CMOS data
and reset the system BIOS information. Normally this jumper should be set with pins
1-2 closed. If you want to reset those data, set JCMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its last status or default setting.
Table 1.1: Clear BIOS CMOS (JCMOS1)
Function Jumper Setting
*Normal
Clear CMOS
*default setting
1
Bekijk gratis de handleiding van Advantech AIIS-3400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | AIIS-3400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9156 MB |
