Advantech ADAM-6217 handleiding
Handleiding
Je bekijkt pagina 10 van 159
ADAM-6000/6200 Series MQTT User Manual
10
2. Service Setting
As below chart, * is a command that has been written in the ADAM-6000/6200 product user manual
and is open to users.
2.1 ADAM MQTT Enable
This section helps to set ADAM MQTT enable/disable.
➢ When ADAM MQTT or Azure or SNMP Trap has been enabled, set EdgeSync 360/ EdgeHub
enable/disable will return Error。
➢ When ADAM MQTT is connected to the broker, set disable will actively publish will topic (status:
disconnect)。
ASCII command:
Command
Description
Remarks
%aaSETMQTTENxx*
aa: always 01
xx: 01 (enable),
00 (disable)
Return: >01
Error: ?01
%aaGETMQTTEN*
aa: always 01
Return: !01 (enable),
!00 (disable)
Error: ?01
2.2 EdgeSync 360/ EdgeHub MQTT Enable
Set EdgeSync 360/ EdgeHub enable/disable.
➢ When ADAM MQTT or Azure or SNMP Trap has been enabled, set EdgeSync 360/ EdgeHub
enable/disable will return Error。
➢ When EdgeSync 360/ EdgeHub is connected to the broker, set disable will actively publish the will
topic (status: disconnect)。
ASCII command:
Command
Description
Remarks
%aaSETWMPENxx
aa: always 01
xx: 01 (enable),
Return: >01
Error: ?01
Bekijk gratis de handleiding van Advantech ADAM-6217, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-6217 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23763 MB |
