Advantech ADAM-5000/TCP-CE handleiding
Handleiding
Je bekijkt pagina 31 van 222
23 ADAM-5000/TCP Series User Manual
Chapter 3 Hardware Installation Guide
3.4.2 I/O modules wiring
The system uses a plug-in screw terminal block for the interface between I/O mod-
ules and field devices. The following information must be considered when connect-
ing electrical devices to I/O modules.
1. The terminal block accepts wires from 0.5 mm to 2.5 mm.
2. Always use a continuous length of wire. Do not combine wires to make them
longer.
3. Use the shortest possible wire length.
4. Use wire trays for routing where possible.
5. Avoid running wires near high-energy wiring.
6. Avoid running input wiring in close proximity to output wiring where possible.
7. Avoid creating sharp bends in the wires.
Figure 3.7 ADAM-5000 I/O Module Terminal Block wiring
Bekijk gratis de handleiding van Advantech ADAM-5000/TCP-CE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-5000/TCP-CE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29002 MB |
