Advantech ADAM-5000/TCP-CE handleiding
Handleiding
Je bekijkt pagina 26 van 222
ADAM-5000/TCP Series User Manual 18
3.1 Determining the proper environment
Before you start to install the ADAM-5000/TCP Series system, there are somethings
that need to be checked.
3.1.1 Check the content of shipping box
Unpack the shipping boxes and make sure that the contents include:
ADAM-5000/TCP Series main unit with two blank slot covers
3.1.2 System Requirement
Host computer
– IBM PC compatible computer with 486 CPU (Pentium is recommended)
– Microsoft 95/98/2000/NT 4.0 (SP3 or SP4) or higher versions
– At least 32 MB RAM
– 20 MB of hard disk space available
– VGA color monitor
– 2x or higher speed CD-ROM
– Mouse or other pointing devices
– 10 or 100 Mbps Ethernet card
10 or 100 Mbps Ethernet Hub (at least 2 ports)
Two Ethernet cables with RJ-45 connectors
Power supply for ADAM-5000/TCP series (+10 to +30 V unregulated)
3.1.3 I/O modules
At least one I/O module is needed to use the system. Prepare the required I/O mod-
ules as the interface for a variety of field singles.
3.2 Installing your main unit and module
When inserting modules into the system, align the PC board of the module with the
grooves on the top and bottom of the system. Push the module straight into the sys-
tem until it is firmly seated in the back plane connector (see figure 3-1). Once the
module is inserted into the system, push in the retaining clips located at the top and
bottom of the module to firmly secure the module to the system (see figure 3-2).
Bekijk gratis de handleiding van Advantech ADAM-5000/TCP-CE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-5000/TCP-CE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29002 MB |
