Advantech ADAM-5000/ECAT handleiding
Handleiding
Je bekijkt pagina 31 van 181
Figure 3.3 ADAM-5000/ECAT panel mounting screw placement
3.3.2 DIN rail mounting
The system can also be secured to the cabinet by using mounting rails (see figure 3-
4). If you mount the system on a rail, you should also consider using end brackets at
each end of the rail. The end brackets help keep the system from sliding horizontally
along the rail. This minimizes the possibility of accidentally pulling the wiring loose. If
you examine the bottom of the system, you will notice two small retaining clips. To
secure the system to a DIN rail, place the system on to the rail and gently push up on
the retaining clips (see figure 3-5). The clips lock the system on the rail. To remove
the system, pull down on the retaining clips, lift up on the base slightly, and pull it
away from the rail.
Figure 3.4 ADAM-5000/ECAT DIN rail mounting
31
Bekijk gratis de handleiding van Advantech ADAM-5000/ECAT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-5000/ECAT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22504 MB |
