Advantech ADAM-5000/ECAT handleiding
Handleiding
Je bekijkt pagina 29 van 181
3.1 Determining the proper environment
Before you start to install the ADAM-5000/ECAT system, there are something
needed to check.
3.1.1 Check the content of shipping box
Unpack the shipping boxes and make sure that the contents include:
ADAM-5000/ECAT main unit with two blank slot covers
3.1.2 System Requirement
Host computer
–
Computer with Atom or Core i CPU
– Windows XP/7 (32 or 64 bit) or higher versions
– At least 32 MB RAM
– 20 MB of hard disk space available
– VGA color monitor
– Mouse or other pointing devices
100 Mbps Ethernet Port (at least 2 ports)
Two Ethernet Cable with RJ-45 connector
Power supply
3.1.3 I/O modules
At least one I/O module is needed to use the system. Prepare the required I/O mod-
ules as the interface for a variety of field singles.
3.2 Installing your main unit and module
When inserting modules into the system, align the PC board of the module with the
grooves on the top and bottom of the system. Push the module straight into the sys-
tem until it is firmly seated in the back plane connector (see figure 3-1). Once the
module is inserted into the system, push in the retaining clips located at the top and
bottom of the module to firmly secure the module to the system (see figure 3-2).
29
Bekijk gratis de handleiding van Advantech ADAM-5000/ECAT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-5000/ECAT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22504 MB |
