Advantech ADAM-4150 handleiding
Handleiding
Je bekijkt pagina 16 van 144
ADAM-4100 User Manual 8
This chapter provides guidelines on setting up and installing an ADAM network. A
simple configuration scheme is provided to help you configure your modules before
installing them in your network. To help you connect ADAM modules with sensor
inputs, several wiring examples are provided. Finally, programming examples using
the ADAM command set are given at the end of the chapter.
Be sure to plan the layout and configuration of your network carefully before you
start. Guidelines for this can be found in Appendix E.
2.1 System Requirements for an ADAM Network
The following list gives an overview of what is needed to set up, install, and configure
an ADAM network environment.
ADAM modules.
A host computer that can output ASCII characters with an RS-232C or RS-485
port.
Power supply for the ADAM modules (+10 to +48 V
DC
).
Adam/Apax .NET Utility.
ADAM isolated RS-232/RS-485 converter (optional).
ADAM repeater (optional).
Host Computer
Any computer or terminal that can output in ASCII format over either RS-232 or RS-
485 can be used as the host computer. When only RS-232 is available, an ADAM
RS-232/RS-485 converter is required to transform the host signals to the correct RS-
485 protocol. The converter also provides opto-isolation and transformer-based iso-
lation to protect your equipment.
Power Supply
ADAM modules are designed to accept industry standard +24 or +48 V
DC
unregu-
lated power. Operation is guaranteed when using any power supply between +10
and +48 V
DC
. Power ripples must be limited to 5 V peak-to-peak while the voltage in
all cases must be maintained between +10 and +48 V
DC
. All power supply specifica-
tions are referenced at the module connector. When modules are powered remotely,
the effects of DC voltage drops must be considered.
All modules use onboard switching regulators to sustain efficiency over the 10 ~ 48 V
input range; therefore, the actual drawn current can be assumed to be inversely pro-
portional to the DC voltage.
Bekijk gratis de handleiding van Advantech ADAM-4150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-4150 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20517 MB |
