Advantech ABDNA-ER-DP551 handleiding
Handleiding
Je bekijkt pagina 30 van 79
30
CONFIGURING FOR WPA2-PSK SECURITY
This security type is a very popular type and is easy to configure. Most often used in SOHO and home
environments, WPA2-PSK is starting to be widely used by enterprise networks.
Table 20 - Configuring for WPA2 Security
Step
Description
Navigation Bar
Select Configuration
You will see a group of fields under the
banner of WLAN Parameters.
Feature Link
Select WLAN Security Settings
The wireless interface must be configured
before configuring the security for the
network.
A page showing the range of security options
and fields is displayed.
Select Wireless LAN Security
Select WPA2-PSK from the drop down list.
Select WPA/WPA2 Pre Shared Key (PSK)
Enter the PreShared Key used by the AP. The
PSK is case sensitive and must be entered
exactly as it is in the AP.
The PSK cannot include spaces.
Press Commit [Button]
Saves changes to the device.
Optional
Press Reload [Button]
Reloads the WLAN Settings page. Select
this if you have further configuration options
to change.
Optional
Press Restart [Button]
Restarts the device. After the device as
rebooted, it will attempt to authenticate to
the configured network. As long as the
network is in range, the wireless interface will
connect.
If the network is using DHCP, then an IP
address will be assigned to the WLAN
interface and IP connectivity is possible over
the WLAN network.
If the network is using static IP addresses, it
will be necessary to configure the network
interface. See the next step.
Feature Link
Select Network Settings
The wireless interface is now configured.
However, if the WLAN network does not have
a DHCP server available to provide IP address
to the device, it is necessary to assign a static
IP address to the wireless interface.
Selecting Network Settings will allow
configuration of the device with a static IP
address. This is covered in section 19.0.
CONFIGURING FOR PEAP SECURITY
This security type is a very popular type for enterprise networks. Actual use of the security protocol requires
that the network is using a RADIUS server for device authentication. Depending on the security policies of
the network, this protocol supports authentication with and without a CA (Certification Authority) certificate.
The Airborne device supports PEAPv0 using both WPA (TKIP) and WPA2 (AES-CCMP) encryption. The
device will automatically use the most appropriate encryption type to obtain authentication to the WLAN.
Table 21 - Configuring for PEAP Security
Step
Description
Navigation BarSelect
Configuration
You will see a group of fields under the banner of WLAN
Parameters.
Feature Link
Select WLAN Security Settings
The wireless interface must be configured before
configuring the security for the network.
A page showing the range of security options and fields is
displayed.
Bekijk gratis de handleiding van Advantech ABDNA-ER-DP551, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ABDNA-ER-DP551 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15499 MB |
